ROBOT OVERVIEW

WITH UVD ROBOTS YOU CAN
AUTONOMOUSLY IMPROVE SAFETY
ANYWHERE, ANYTIME



UVD Robots®

Model c


3RD GENERATION AUTONOMOUS UV-C DISINFECTION

MODEL C

The UVD Robot® Model C has been designed based on feedback from infection prevention specialists to be part of a regular cleaning routine, and aims at reducing the spread of infectious diseases, bacteria, and other types of harmful organic micro-organisms and pathogens in the environment. Our agile 3rd generation robot has several new features, that raises to a higher level of infection prevention.

Bobot


Feature Highlight
UV-C LIGHT

Our UVD Robot® disinfects small and large areas simply just by driving by. Depending on the exposure time, The UVD Robot can kill up to 99,99% of pathogens such as MRSA, C. dif, and CPR/CRA. It disinfects all environments that are potentially harbouring dangerous microorganisms.
The UV-C light is highly effective against most types of bacteria and viruses, and when used correctly, can be also gentle to surfaces.

robot


Feature Highlight
AUTONOMOUS

The germicidal characteristics of UV-C light at close range are well known. However, the laws of physics create obstacles that challenge the feasibility of using UV-C light as a disinfectant in larger areas: Shadow & Distance.
The unavoidable challenges of using UV-C disinfection governed by the laws of physics create the necessity for repositioning a manual UV-C device multiple times.
Only with the autonomous UVD Robots® can you be sure to have irradiated sufficient UV-C amounts on to all surfaces within a given area.

base


Feature Highlight

FOOTPRINT

The UVD Robot® has one of the smallest footprints on the market, and that makes the Model C ideal for smaller passages like in trains and on airplanes, and with a width of 55 cm it can easily drive through a standard door.

robot


EASE OF USE

The robot is operated by following the easy step-by-step guide.
The autonomous drive system allows operators to easily call the robot via its tablet and send it to the desired location while the initial cleaning is taking place.
After the cleaning has been conducted, the robot is sent in. Once the disinfection has been activated, and the tablet placed on the door, the operator can continue their planned work elsewhere until it is finished. After the disinfection, the robot signals via the tablet that the disinfection is finished. The robot is now ready to disinfect a new room.

sensor


Feature Highlight

CAMERAS & SENSORS

The UVD Robot® comes with laser scanners and 3D cameras that recognize obstacles and recesses on its way.
The UVD Robot® can be driven manually from a distance. By using the cameras the operator can navigate via the tablet. The 3rd generation robot can make a Heat map and an Exposure map for the operator to improve disinfection.

robot


Feature Highlight

POWER

The UVD Robot® is powered by Li-MNC batteries that gives you the power to disinfect larger areas such as airports, supermarkets, conference rooms and several patient rooms.
It comes with a docking station, which the UVD Robot® finds by it self, when it needs recharging. To make sure that it is fully charged and ready for its next disinfection, time saving as it requires no involvement from the operator.

sensor


Feature Highlight

SAFETY

The robots sensors will detect if someone enters a room under a disinfection, and immediately stop the disinfection.
The safety system will be triggered if the operator drives the robot manually too close to a wall, person, or other object above 15 cm. If this occurs, the robot’s front and rear sensors will trigger the robot to stop before hitting the object.